Re: [Chrysler300] PCV Valve on G and 300F stalling

[Marshall Larson <yelof@xxxxxxxx>]

No stalling issues with mine mounted there.  I am certain it is a factory
piece because the fitting is pressed into the tube with no signs of
welding inside or out.
 
Minnesota Marshall
 
 
On Mon, 25 Aug 2008 08:58:21 -0700 (PDT) Paul Martin
<paul_martin78ca@xxxxxxxx> writes:
> Bobs message made me realize i installeda PVC valve on my F when I 
> rebuilt the engine. I connected it to the balance tube as close to 
> the middle as possible, and allowing for linkage clearances.
> Any input on how this might affect the stalling.
>  
> Paul
>

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/