Re: [Chrysler300] Master Cylinder

[Bill Huff <czbill@xxxxxxxxxx>]

I am pretty sure that is the same MC I have on my 1967 GTX, it is 
Rock Auto M71258 with a 1" bore.  I have a used original Wagner which 
I was considering getting sleeved so I would NEVER have to remove it 
again.  Other than fluid reservoir size, I don't see why it won't 
work for disk brakes as well.

Bill Huff


At 9/24/200802:30 AM, Gary Barker wrote:

>I guess I will jump in and show the Master Cylinder I used on my 
>300F. It is a Wagner #F71258. The same that came from the Factory on 
>my 69 Dodge 1/2 T Pickup.
>Go to rockauto.com and put the F71258 in the search for part number 
>tab. When the MC comes up click on the picture for a blow-up.
>I tried buying a rebuilt one from 4 different major auto parts 
>stores and all I got was a rebuilt Delco. So I had to go for a new 
>one. It fits perfect and the lid is easier to get off. One bolt in the middle.
>Gary Barker
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/