No source, but I remember guidance to see a gunsmith for the springs. And, perhaps, the springs from similar flappers in Chebby hardtops '51-'57 might fit. My question is what to place on the little foot that rests against the top of the vent window and triggers the flapper to open and close. Is it supposed to have a hard plastic or rubber cover over the steel to keep it from eating a hole in the vent window edging? Any neat substitutes discovered? Also, is there supposed to be a thin rubber gasket between the flapper mechanism and the roof edge? C-300'ly, Rich Barber Brentwood, CA (Near Mendocino this week--in gorgeous weather) 1955 Chrysler C-300-Suffering from the copper flapper caper -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of cotejohnr@xxxxxxx Sent: Thursday, September 25, 2008 2:03 PM To: chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] C300 & 300B window flap springs Hi all, Does anyone reproduce or have a source for the springs that are used on the weather "flapper" at the top of the window and part of the body stainless roof trim that opens and closes when the door opens and closes.? There are two different ones. One above the wing is one kind of spring and the other two are in middle and rear of the flap are the different. Thanks, John Cote CT. [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/