I believe the original Chrysler lenses wil have "CHY", "CHRY" or somethin like that molded into them at the bottom and also there should be the part number cast into them, probably on the inner edge that rests against the gasket when installed. Dave Schwandt ----- Original Message ----- From: "Ron Waters" <ronbo97@xxxxxxxxxxx> To: <chrysler300@xxxxxxxxxxxxxxx> Sent: Friday, March 13, 2009 10:29 AM Subject: [Chrysler300] OEM vs. Glo-Brite > All - > > If I had an unused 57 Chrysler tail light lens without a box, how would I > be > able to tell whether it was a genuine Chrysler or an aftermarket Glo-Brite > ? > > Ron > > > > ------------------------------------ > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups > Links > > > > ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/