Interesting that the '58 and '59/'62-'65 spacers are the same--one engine being a hemi and the others wedges. Did they use the same carbs? C-300'ly, Rich Barber -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of lettercars@xxxxxxx Sent: Wednesday, May 06, 2009 7:00 AM To: chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] Fwd: Fw: D500 carburetor spacers Hi Group: Thought this would be of value to many of you. I haven't used them, but the picture of them sure looks good. 300ly, Gil Cunningham ____________________________________ From: p.bruun@xxxxxxxx To: Lettercars@xxxxxxx Sent: 4/28/2009 1:36:15 P.M. Eastern Daylight Time Subj: Fw: D500 carburetor spacers Hello again Gil! I just want to show our newest product. This is correct for 1958-59 and 1962-65 2x4carburetor Chrysler set-ups (non cross-ram). It's made of the correct material, however not cast, correct thickness and everything else correct too! The only thing we lack is the Chrysler part number. Regards Peter Bruun _www.carbguy.com_ (http://www.carbguy.com/) ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/