Re: [Chrysler300] 300L - severely rusted brake shoes and brake drums

["Gary Holm" <gholm@xxxxxxxxxxx>]

Carlton;   Cut a piece of 1/2  -3/4  plywood into 4 pc., 12" wide. take one pc. and sandwich some pieces of pipe  Again 1/2 or 3/4  between  them under the wheels, so that the plywood, ( and the wheels ) roll over each other. 1 pc. of plywood per 2 wheels.Then pull towards your trailer, with a winch. Sometimes pouring motor oil under the wheels,  will let it slide, on the plywood.  Don't forget the EPA, & DEQ reports if you use the oil trick!!!.  Get it home and then use some heat on drum ,where it is safe.  Good luck.  Not easy , but it worked for me me!!! Gary with a big G
  ----- Original Message ----- 
  From: Carlton Schroeder 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Tuesday, July 21, 2009 4:28 PM
  Subject: [Chrysler300] 300L - severely rusted brake shoes and brake drums


    Hello, 

  Thanks in advance for any suggestions. Wisecracks and jokes are OK too.

  I'm trying to load and transport the 300L I rescued from the woods near where I live. It has sat parked outside for 20 + years. My brother near Toledo has agreed to undertake the restoration. He'll join our Club and I've told him of all the help he'll get from everyone.

  I've had all the wheels off, placed a lot of penetrate inside the drum from the back side and hammered on the drums. One front drum of the four is loose. I've tried rocking and jerking the car with my truck but all I can do is skid the car. I haven't used any heat on the drums. The teeth stripped off the one star wheel I tried to turn. I'm going to try one more time in the morning to get them loose but then I need to load the car on the trailer I borrowed and be on my way.

  I have some good smooth tin and thought if I place that under the wheels and up the ramps and on the trailer floor and use some soap suds I can skid the car onto the trailer. I would use two come-alongs.

  Are there some other tips for loosening these drums or for skidding the car onto the trailer if I don't get them loosened?

  Thanks again,

  Carlton Schroeder
  Eagle River, WI

  [Non-text portions of this message have been removed]



  


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.392 / Virus Database: 270.13.20/2250 - Release Date: 07/20/09 06:16:00


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/