[Chrysler300] Protecting hard to access enclosed areas

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

Howdy,

There is good frame-painting info in the Tech Area of the Club website but I didn't see any info on protecting the hard-to-access enclosed areas in the sub frames and enclosed channels in the trunk area.  There are many access holes for air blowing and high-pressure water cleaning so I think they can be cleaned pretty well but they probably would still have surface rust.  

Without having an option to dip the frame area in paint would spray painting through the access holes be adequate?  

Does anyone have other suggestions that would result in decent protection to the interior surfaces?

Thanks,

Carlton Schroeder
Eagle River, WI
(2" snow yesterday and temps about 15 - 20 F below normal)    



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/