RE: [Chrysler300] Powder Coating Removal

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

Ron,  
 
Just another thought, clean up the surface and spray it with Cast Blast from
Eastwood.  The powder coat makes a good primer and the part will then have
an original look with less work than stripping.
 
Bob J

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Ron Waters
Sent: Monday, October 26, 2009 7:06 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Cc: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Powder Coating Removal


  

Hi All -

Someone gave me a clean master cylinder housing that had been powder coated 
a glossy brown color. I want to remove the powder coating. Does anyone know 
the recommended procedure for doing this ?

Thanks,

Ron 






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/