Hi Group: I made a brake fluid fill bottle and hose to fill the master cylinder on my 300 G and Packards. At your local hardware store ( I use Ace Hardware ) in the kitchen supply department. I found a plastic squeeze bottle with a flip top spout cover. Like you use for Ketsup, etc. The hardware store will also have a supply of clear plastic hose. Find the size that fit snuggly over the tip of the squeeze bottle. Buy the length of hose you need to get to the master cylinder. 12 to 24 inches. I wrapped a couple loops of wire around the hose connection to the squeeze bottle. I made two of these. One for DOT 3 And one for DOT 5 Cost to make one of these is less than 4.00. ( And I made it myself ) Lauren R Lampi Grand Rapids, MN ( Up to 40 above the last 4 days..snow is going like crazy ) 300 G ( and 2 Packards) ----- Original Message ----- From: Dan Granger<mailto:dan.granger@xxxxxxxxxxxxxxx> To: Chrysler300@xxxxxxxxxxxxxxx<mailto:Chrysler300@xxxxxxxxxxxxxxx> Sent: Wednesday, March 03, 2010 11:15 AM Subject: [Chrysler300] 57 Brake Fluid Fill To all. Is there some secret to adding brake fluid without removing the power brake booster unit over the top of the master cylinder? Thanks Dan Dan.Granger@xxxxxxxxxxxxxxx<mailto:Dan.Granger@xxxxxxxxxxxxxxx> The information contained in this e-mail and any attachments is confidential, intended solely for the use of the intended recipient(s) and may be legally privileged. If you are not the intended recipient please destroy this correspondence and all attachments. Any dissemination, distribution or copying of this e-mail or any attachments is strictly prohibited. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/