Re: [Chrysler300] F or G trunkpan needed,parting a 63 coupe

[2HsandaHeritage@xxxxxxxxxxx]

Bob and all, 

I have a friend who is looking for a source for trunk floors for a 1969 Newport conv. - any suggestions or sources? 

Thanks, 

Doug Warrener 
----- Original Message ----- 
From: "Bob Jasinski" <rpjasin@xxxxxxxxxxx> 
To: chrysler300@xxxxxxxxxxxxxxx, "charles marshall" <dualghia@xxxxxxxxxxx> 
Sent: Monday, March 8, 2010 9:18:33 AM GMT -08:00 US/Canada Pacific 
Subject: RE: [Chrysler300] F or G trunkpan needed,parting a 63 coupe 

  




Regarding trunk floors, I copied this thread from 2006 that will provide 
insight as to what fits. It's from Don Verity and John Hertog. Also, I 
know someone was/is reproducing the floors, I just have to find it. They 
were about $175 delivered. 

Bob J 

Hi All, 

The trunk floors from 60-64 are exactly the same as removed at the spot 
welds. The location of the spare tire hold down is the only difference. The 
filler neck area is actually part of the rear body panel. 

300ly, 

Don 

----- Original Message ----- 

From: John J. Hertog < crossram@xxxxxxxxxxxxx > 

To: Jonnie < Jslayton@xxxxxxxxxx >; < Chrysler300@xxxxxxxxxxxxxxx > 

Sent: Saturday, January 07, 2006 6:37 AM 

Subject: Re: [Chrysler300] trunk floors 

> Hi Johnnie, 

> 

> My turn - if you find two of them, let me know, I also need one ! The 

> answer to your question is that 60 thru 64 Chrysler are the same as 

> far as the flat part of the floor. Find a '64 (a lot easier to find) 

> and you are all set. There is only one very minor difference and it's 

> by the gas 

filler 

> area if memory serves me right. 

> 

> John 

> ----- Original Message ----- 

> From: "Jonnie" < Jslayton@xxxxxxxxxx > 

> To: < Chrysler300@xxxxxxxxxxxxxxx > 

> Sent: Friday, January 06, 2006 10:43 PM 

> Subject: [Chrysler300] trunk floors 

> 

> 

> > Can someone tell me if the 60-61 trunk floors are the same ? Does 

> > anyone have a used 61------decent shape------they would like to sell 

> > ?------Johnnie Slayton 

_____ 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto: Chrysler300@xxxxxxxxxxxxxxx ] On 
Behalf Of Jerry Lindsay 
Sent: Monday, March 08, 2010 4:12 AM 
To: chrysler300@xxxxxxxxxxxxxxx ; charles marshall 
Subject: Re: [Chrysler300] F or G trunkpan needed,parting a 63 coupe 

I know there is a source out there, New Jersey, Georgia, somewhere. I know 
Source One makes floor pans that fit, and I believe the trunk guy may have 
even advertized in our club leter?? 

Jerry Lindsay 
----- Original Message ----- 
From: "charles marshall" <dualghia@hotmail. <mailto:dualghia%40hotmail.com> 
com> 
To: <chrysler300@ <mailto:chrysler300%40yahoogroups.com> yahoogroups.com> 
Sent: Sunday, March 07, 2010 9:51 AM 
Subject: [Chrysler300] F or G trunkpan needed,parting a 63 coupe 

anyone have a solid trunkpan from a 1960 or 61? is a 62 the same? 

also could use the panel that holds the weatherstrip between the bumper and 
trunklid 

helping a friend dispose of 63 non-letter coupe parts from a rust-free calif 

car if anyone needs any sheetmetal,chrome,int parts,383 core,etc 

__________________________________________________________ 
Hotmail: Trusted email with Microsoft's powerful SPAM protection. 
http://clk.atdmt. < http://clk.atdmt.com/GBL/go/201469226/direct/01/ > 
com/GBL/go/201469226/direct/01/ 

[Non-text portions of this message have been removed] 

------------------------------------ 

To send a message to this group, send an email to: 
Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com 

For list server instructions, go to 
http://www.chrysler < http://www.chrysler300club.com/yahoolist/inst.htm > 
300club.com/yahoolist/inst.htm 

For archives go to http://www.forwardl 
< http://www.forwardlook.net/300-archive/Yahoo > ook.net/300-archive/Yahoo! 
Groups 
Links 

[Non-text portions of this message have been removed] 




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/