RE: [Chrysler300] radio repair

["Blohm, Robert" <robert.blohm@xxxxxxxxxxx>]

Charlie, Yes it is likely the volume control rheostat. Go to radio shack and buy contact cleaner spray battle. Spray it into the volume control and turn the volume control serveral times from end to end. Disconnect the battery before doing this to avoid extreme high volume. Hope it works. Regards, Bob Blohm
________________________________
From: Chrysler300@xxxxxxxxxxxxxxx [Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of charlies@xxxxxxxxxxxx [charlies@xxxxxxxxxxxx]
Sent: Thursday, May 20, 2010 8:22 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] radio repair



 Hi To All,
Thanks to all who gave advise on clock repair in my 62. Shes now ticking away smoothly (although 5 minutes a day fast). After re and re'ing the complete dash for various issues, the last item to address is the radio (model 327). So is there anyone with experience with these old semi - tube radios. The issue is that when I turn the radio on, the volume is very loud and I can't lower it. I suspect it may be the volume control, but could it be one of the tubes?
Thanks, Charlie in Ottawa



This email message and any attachments transmitted with it may contain confidential information and are intended only for the individual(s) to whom the message is addressed.  If you have received this email message in error, please notify the sender by reply email and delete it from your system; you should not distribute or copy this email message or its contents.  Any views or opinions presented in this email message are solely those of the author and do not necessarily represent those of EnerSys or its affiliates (“EnerSys”).  No employee or agent is authorized to conclude any binding agreement on behalf of EnerSys with another party by email.  EnerSys accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed by EnerSys in a signed writing.  The recipient should check this email and any attachments for the presence of any virus.  EnerSys accepts no liability for any damage caused by any virus transmitted by this email message or any attachments.


EnerSys  2366 Bernville Road,  Reading, PA 19605  www.enersys.com<file:///C:/Program%20Files/Exclaimer/www.enersys.com>


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/