RE: [Chrysler300] 300H Clearance Difference

["Richard Barber" <c300@xxxxxxx>]

As I recall, there is a specification for the ride height that is based on a
distance from the top of the rear axle to a designated spot under the body
or frame.  This takes the tires out of the equation.

Rich Barber
Brentwood, CA

________________________________________
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Jerry Lindsay
Sent: Friday, May 21, 2010 5:18 AM
To: Larry Phillips; 2HsandaHeritage@xxxxxxxxxxx
Cc: Chrysler 300 Club International
Subject: Re: [Chrysler300] 300H Clearance Difference

  
Doug,
This may seem dumb to everyone, but is the tire pressure equal? Switch
positions of the cars and see if it's still the same.

Jerry
----- Original Message ----- 
From: 2HsandaHeritage@xxxxxxxxxxx 
To: Larry Phillips 
Cc: Chrysler 300 Club International 
Sent: Thursday, May 20, 2010 11:08 PM
Subject: Re: [Chrysler300] 300H Clearance Difference

Hi Larry, 

Thanks for the reply. 

Would you let me know what the diameter o r radius of your 14" tire is? 

A friend has a 62 sport conv. with 14" tires and the radius is 13" 

The radius on my H tires is 14-1/2". 

The difference of 1-1/2 " would increase your 9" measurement to 10-1/2"
which is close to the 11" on my H2 . 

Doug 

----- Original Message ----- 
From: "Larry Phillips" <acplap1@xxxxxxx> 
To: 2HsandaHeritage@xxxxxxxxxxx 
Sent: Thursday, May 20, 2010 5:52:38 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [Chrysler300] 300H Clearance Difference 

Doug, 

Just for laughs, I went out and measured my 300 Sport, which by the way, was
also built in November 1961. It measured exactly 9" with 14 inch tires,
original leaf springs and new original replacement hydraulic shocks. I'm not
exactly sure what this information means, but I thought I would pass it on
to you. I would be interested in learning what conclusion, if any, that you
ultimately came to. 

Good luck with your results, 

Larry Phillips 
Avon, CT 

From: "2HsandaHeritage@xxxxxxxxxxx" <2HsandaHeritage@xxxxxxxxxxx> 
To: Chrysler 300 Club International <Chrysler300@xxxxxxxxxxxxxxx> 
Sent: Thu, May 20, 2010 3:56:22 PM 
Subject: [Chrysler300] 300H Clearance Difference 

Hi Group, 

I have a 2 inch difference in the height measurement from my garage floor to
the horizontal bottom of the rocker panels on my two H's. 
Both cars have 15" wheels and identical 235-75R-15 tires. 

H1 was built in April 1962, has new Eaton springs and KYB gas shocks. It has
an average height measurement of 9 inches. 

H2 was built in November 1961, has original springs (possibly re-tempered),
and new original equipment hydraulic shocks. It has an average height
measurement of 11 inches. 

Did something in the manufacturing process change from November 61 to April
62? 

Doug Warrener 

Fair Oaks, CA 

300H - 2 

[Non-text portions of this message have been removed] 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/