Thanks, Fern! How about that for Keeping it Simple? Was wondering about that while reading all the complex suggestions for simply removing the cable. I have done so for at least 30 years. I make use of Kopr-Shield conductive and anti-corrosive surface compound wiped on both the battery posts and terminal clamps. That way a mere twist of the battery cable end either disconnects or connects and you are good to park or go. The material is, if I remember, available from Eastwood. I use it on all electrical connections as well. 300ly, Gil C. In a message dated 6/13/2010 10:30:26 A.M. Eastern Daylight Time, crc@xxxxxxxxxxxxxxx writes: I have never found the need for one of those battery disconnects as with it you'll end up with a weird adapter. What I've been doing for years is to never quite tighten up the negative clamp and then I can easily twist it ON or OFF without use of tools. I always disconnect the negative cable whenever I park the car at either a car show or it's storage area. My theory is that it's hard to have an electrical fire if you don't have a dc loop in the vehicle. Just my 2 cents worth. Fern with 300L ht and 300H conv [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/