RE: [Chrysler300] 300C rear parcel shelf

["Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>]

Hi to all who responded so far.

Maybe I should have been clearer.  The plate that mounts my blower
(defroster motor) is a similar but different plate, which I also have.  That
plate has a depressed shape with the large hole through it (for the air to
be drawn through) offset to one side of the speaker outline.  The plate I
was talking about is completely flat with the same size hole directly in the
middle.  At first I thought it was home made because it was bent and rusty
but it is actually stamped out, not cut out. Its screw holes don't line up
with the defroster motor (which uses three screw holes on a larger
diameter).  It has two pairs of holes, one offset at an angle from the
other, possibly for two mounting options for whatever attaches to it.  Maybe
earlier model's with rear aircon used these?  I can't send a picture on this
server.  If someone has another suggestion, I'll send a photo directly to
confirm.  Does anyone with an original 300C have nothing under unused
speaker holes?

Note that I have obtained two speaker grills, one to cover the defroster
inlet and the other for the single rear speaker.

Thanks again

Henry

-----Original Message-----
From: Dave Schwandt [mailto:finsruskw@xxxxxxxxxxxxxxx] 
Sent: Thursday, 22 July 2010 11:14 PM
To: Chrysler300@xxxxxxxxxxxxxxx; Henry Schleimer
Subject: Re: [Chrysler300] 300C rear parcel shelf

1st thought that come to mind is Maybe rear window defrost.
My F has that but I'm not home to take a closer look at it.
How about a link to a picture??

Dave Schwandt

In beautiful  Ebensburg, PA this morning


----- Original Message ----- 
From: "Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Thursday, July 22, 2010 7:58 AM
Subject: [Chrysler300] 300C rear parcel shelf


> My car came with a rear speaker and blower options.  Loose with the car 
> was
> another flat steel plate designed, I assume, to fit the other speaker hole
> in the rear shelf.  I was going to install it to support the shelf but I 
> am
> curious why it has a 2 ½" hole in the middle (with 4 screw holes around 
> it).
> It looks like it is designed to mount something but I am not aware of any
> thing else that goes there.  Is it for an air conditioner outlet?  My car
> hasn't got aircon.
>
>
>
> Thanks
>
>
>
> Henry
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
>
> To unsubscribe from this group, send an email to:
>    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
> Links
>
>
>
>
> 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/