Doug, I would consider this product: http://www.nyalic.com/uses.html It is very durable and I’ve a lot of it over the years especially like on wire wheeled or bead blasted fasteners. It doesn’t chip, goes on thin and stays in place. You would need to try it on a small section first to see if it is the level of gloss you want. Eastwood used to sell it but lost the marketing agreement. They sell something called Diamond Coat, but it is not the same. Nyalic is tough stuff. For the tach cable I’d consider graphite or Penephite from Kano labs: http://www.kanolabs.com/ I’ve had good luck with it for cables. Bob J From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 2HsandaHeritage@xxxxxxxxxxx Sent: Wednesday, September 29, 2010 8:10 PM To: Chrysler 300 Club International Subject: [Chrysler300] Tach Cable Lube & Console - 300H I have my console out and think that now is the time to lube the tach cable. The archives don't say much about what type and how much to use. All suggestions will be appreciated. I am installing seat covers, seat foam, carpet and winnlacing from Gary - The original carpet is still there! - Was covered by another layer. Does anyone know where I can find the rubber gromets that fit in the floor pan that the seat bolts go thru? I am having the aluminum console trim strips polished and don't want to have them re-anodized. Is there a recommended clear finish to use to prevent oxidation? Doug Warrener Fair Oaks, CA 300H [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/