Re: [Chrysler300] '57-'58 floor pans (and '59 too?)

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

  They're decent enough people, and gave me all my money back (including 
freight) on a pair of quarter panels I bought from them a number of 
months back.  But I would not have wanted to keep them even if they were 
free.  The shapes were just flat-out wrong.  So I would be concerned 
that other parts, such as the trunk or floor pans, would be equally 
incorrect.

Keith

-

On 10/4/2010 10:59 AM, George Cann wrote:
>  On the subject of '57-'59 floor pans, has anyone delt with Classics 
> to Current Fabrication in
> Michigan?  They seem to have what Keith and maybe a few others need.
> I know nothing about the company, just came across while searching for 
> something else.
> Web site is: www.c2cfabrication.com <http://www.c2cfabrication.com>
> Regards,
> George Cann
>
>     ----- Original Message -----
>     *From:* Keith Boonstra <mailto:kboonstra@xxxxxxxxxxxx>
>     *To:* Chrysler300@xxxxxxxxxxxxxxx
>     <mailto:Chrysler300@xxxxxxxxxxxxxxx>
>     *Sent:* Saturday, October 02, 2010 1:27 PM
>     *Subject:* Re: [Chrysler300] '57-'58 floor pans (and '59 too?)
>
>     OK, it looks like I guessed wrong, and nobody else needs a new floor
>     in their '57-'58. So if the others didn't rust out like mine, does
>     someone have the left and right floor sections to sell me?
>
>     Thanks.
>
>     Keith Boonstra
>
>     -
>
>     On 9/30/2010 2:04 PM, keboonstra wrote:
>     >
>     > We're thinking of hand forming a few sets of floor pans, left of
>     > tunnel and right of tunnel to the rockers. These would run (in
>     one or
>     > two pieces) from the firewall to the rear seat. They would be
>     modeled
>     > from a '58 California Windsor floor. I do not know if the '59 is
>     the
>     > same. Anyone interested in getting in? What would it be worth to
>     you?
>     >
>     > Keith Boonstra
>     >
>     >
>
>     [Non-text portions of this message have been removed]
>
>     
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/