[Chrysler300] seat belt color

[Jim Pristelski <ajp002@xxxxxxxxx>]

At least as late as 1961, seat belts were not an option which could be
ordered directly from the factory.   But, most dealers installed them at the
request of customers.  It was not a very frequent request at my father's
dealership.  Considerably less than 10% of the customers requested
installation, and probably more like about 5%.  Seat belts were quite new
then.  While most customers probably heard of them prior to their purchase,
they were not deemed necessary.

My father's staff did not like installing them because strands in the
carpeting would tend to wind up around the drill bit while drilling through
the floor pan for installation of the anchor bolt.

At that time, the only color that I recall was black.

Best,

Jim in northern IL


---------- Forwarded message ----------
From: <2HsandaHeritage@xxxxxxxxxxx>
Date: Thu, Oct 7, 2010 at 12:16 PM
Subject: Re: [Chrysler300] seat belt color
To: Dave Schwandt <finsruskw@xxxxxxxxxxxxxxx>
Cc: list server <Chrysler300@xxxxxxxxxxxxxxx>






Hi Dave,

I believe that 1962 was the first year that seat belts were standard
equipment.

My H belts were/are black and do not match the tan interior.

The buckles are the "lift type" and are chrome plated except for the top
which is aluminum with an indentation for the 300 emblem.

The anchors look like an eye bolt and are threaded through a plate that is
welded to the under side of the floor .

Hope this helps,

Doug Warrener

Fair Oaks, CA

300H
----- Original Message -----
From: "Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx<finsruskw%40iowatelecom.net>>

To: "list server" <Chrysler300@xxxxxxxxxxxxxxx<Chrysler300%40yahoogroups.com>>

Sent: Thursday, October 7, 2010 4:33:36 AM
Subject: [Chrysler300] seat belt color



Question....Were seat belts available as an option for the F in 1960?

If so, what color would they have been for the standard F interior and what
type hardware would they have used?

I have what I believe to be "period correct" hardware, buckles etc but need
to have new webbing sewn on. The buckles are the chromed "lift type"
release. Any one use this "Snake Oyle" outfit or any other seat belt repair
place you could recommend?

Thanks
Dave Schwandt

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/