RE: [Chrysler300] 1962 300 - Cooling Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 1962 300 - Cooling Question



I would go for the stat replacement. You can test in hot water. Just before
boil it should be fully open.

Thank you,
Gary, the parts doc
Reno, Nevada 89521 USA
The Biggest Little City In The World
Mail: garythepartsdoc@xxxxxxxxxxxx
775 851-1420






  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of Matt Allyn
  Sent: Thursday, February 17, 2011 8:11 AM
  To: Chrysler300@xxxxxxxxxxxxxxx
  Subject: [Chrysler300] 1962 300 - Cooling Question



  Here's a constant temporary issue I am having....

  When car is cold, from sitting all night...
  It starts up fine, I warm it up for 2 minutes and then start to drive.

  About 5 minutes into the drive the temperature guage begins it s ascent to
it's
  normal spot; just about a quarter of the way up from the dead cold
position.
  Then the needle keeps going, all the way to the HOT position, where it
sits for
  a minute...and then it creeps back down to the quarter mark.

  Here is what I have done to date:
  - Pulled the NEWER radiator and had it flushed
  - Flushed the block out twice
  - Water Pump is fairly new on the 45,000, new everything, motor
  - Newer Hoses are not collapsing
  - Heater core is clean and works
  - I have "burped" the radiator

  All I can think of is that the Thermostat is taking too long to fully open
and
  needs to be replaced??
  Who's with me?
  (Just a pain in having to lift up that A/C Compressor to make that
change.)
  Thanks!

  Matt Allyn

  [Non-text portions of this message have been removed]



  


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.