Re: [Chrysler300] Correct 1957 300C U-joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Correct 1957 300C U-joints



Member Mark Sherman has the boots available .
His ad is in the web site classified.
Got 2 of 'em from him just last week.

Dave Schwandt

----- Original Message ----- 
From: "Rob Kern" <robkern@xxxxxxxxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>; "keboonstra" <kboonstra@xxxxxxxxxxxx>
Sent: Monday, March 14, 2011 9:06 PM
Subject: Re: [Chrysler300] Correct 1957 300C U-joints


Keith,
    NAPA list for 300C front universal kit is #215R and rear universal joint 
is #314G. If this doesn’t work for you then contact Andy Bernbaum in Newton, 
Mass. at 617-244-1118.  I purchased my front universal kit from him along 
with the ball and trunion set-up.  Keep your rubber boot as they are very 
hard to locate and Andy didn’t have them.  There are firms that offer 
conversion kits from the old ball and trunion front set-up to modern 
u-joints that are listed on the vendors and services site under the TECH 
section provided by Bob Merritt if you are interested in going that route. 
I explored it 3 years ago and was advised against swapping out the ball and 
trunion joint in the front by other club techies for various reasons. Hope 
this helps! 300’ly, Rob Kern

From: keboonstra
Sent: Monday, March 14, 2011 10:43 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Correct 1957 300C U-joints


I called NAPA to get new u-joint kits for my C, but their book only goes 
back to '58. When I look in my '55-'58 parts book under joint package, it's 
not entirely clear to me just which one the 300s use. Is it the same on all 
C76, C76-300, and LC-3?

Thanks folks.

Keith Boonstra





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups 
Links





------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.