[Chrysler300] 300 F: from 413 to 426

["Antonello Jelitro" <antonino.jelitro@xxxxxxxxxxxxx>]

Hello
I have finally received the engine for my F, it's a 413 that has already been overbored 0.60. There is some ridge at  top of the cylinder walls so would need an overbore. I would purchase pistons for a standard bore 426, is this a safe thing? Has the 413 safely been overbored to 426 specs? Any problems of overheating or oil consumption? I would fit a set of heads from a 300 J with large valves. 
ANy suggestion would be greatly appreciated. Thank you Antonello

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/