Replies to Walt at waldor@xxxxxxx -------- Original Message -------- Subject: 1964 -300 K - Ram--Leaking brake booster-& Slave cylinder Date: Sat, 28 May 2011 19:20:40 -0700 From: waldor <waldor@xxxxxxx> To: <bob@xxxxxxxxxxxxx> --- Hello Bob--Can you put this on the List server-to see if anyone has any suggestions-- I have a problem with my 64 K Long Ram brake system-leaking-- as the booster and slave cylinder are up under the Drivers fender-I took the unit out to-day and looped the one brake line back into the other to by-pass the slave & booster--so I can drive it till it gets fixed. The leak before removable looked like it was from the slave cyl AND when removed --the Booster was FULL of brake fluid [ Bad Diaphragm???]-SO Is it a joke to assume that NAPA or someone has a -Slave cyl [ or KITS]- --to rebuid it & the booster --I would appreciate ANY HELP-- --Thanks for now Walt Reinecker----300 Club Member Stratford Ontario Canada [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/