Hi Al One thing you might check is the soft rubber hose that attaches to the wheel cylinder. I have heard of them closing up internally and they dont completely release the pressure. ----- Original Message ----- From: Albert Vannice To: Chrysler300@xxxxxxxxxxxxxxx Sent: Tuesday, July 12, 2011 12:29 PM Subject: [Chrysler300] 300 J Hi All, I'm in the process of getting my newly acquired 300 J on the road. Among other things, it needed new brake cylinders and lines and all were replaced. The brake linings and drums all looked good with no leakage or unusual wear. Now, during driving and moderately hard braking, the car pulls strongly to the left. After stopping, the right front drum is very hot. The brakes were adjusting according to the service manual. We are going to pull the right front wheel and examine it, but any suggestions before we do so would be appreciated. Thanks. Al [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/