Re: [Chrysler300] Re: 300H fan blade diameter/ noise
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Re: 300H fan blade diameter/ noise




Mike, let me know if you find a source for a fan clutch. 

Five or so years ago I bought one from George Riehl, but I understand that he no longer has a source for them. 

Doug 



----- Original Message -----




From: "Michael Moore" <mmoore8425@xxxxxxx> 
To: "Jim Maiani" <jmaiani@xxxxxxxxxxx> 
Cc: "chrysler300@xxxxxxxxxxxxxxx Club" <Chrysler300@xxxxxxxxxxxxxxx> 
Sent: Saturday, December 24, 2011 5:44:54 PM 
Subject: [Chrysler300] Re: 300H fan blade diameter/ noise 

  




Hmm, mine is 18 inch. The clutch is free to rotate. I have noticed it makes a fan noise like it did years ago when the clutch failed, as though it were locked up. 

On Dec 24, 2011, at 2:22 PM, Jim Maiani wrote: 

> Mike Looking at my survivor H, it has 7 blades and the best I can measure it looks like 19" diameter fan. Hope that helps. 
> 
> Merry Christmas to all! 
> 
> Jim Maiani 
> Houghton Lake, MI 
> H 
> 
> 
> -------------------------------------------------- 
> From: "Michael Moore" < mmoore8425@xxxxxxx > 
> Sent: Saturday, December 24, 2011 1:14 PM 
> To: < chrysler300@xxxxxxxxxxxxxxx > 
> Subject: Re: [Chrysler300] Spark plugs 
> 
>> Does anyone know the diameter and no of blades should be on a 300H ? 
>> 
>> Does anyone know a source fir a correct fan blade clutch? 
>> 
>> Thanks, Mike Moore 
>> Morgan Hill, Ca 
>> 
>> 
>> On Dec 24, 2011, at 10:10 AM, Rich Barber wrote: 
>> 
>>> A quick Google indicates the pitch is also metric-1.25 mm-20.32 
>>> threads/inch. Also, recommends using a thread chaser, not a tap. 
>>> 
>>> Reminds me of an early and major panic when I twisted off a new spark plug 
>>> in a customer's hemi at Earl Canady's Phillips 66 station at 42nd & 
>>> University in Des Moines in about 1955. As a young teen, I pictured having 
>>> to pull that huge head and a trip to a machine shop. Otto, the senior 
>>> mechanic, selected a long, heavy screw driver, inserted it into the broken 
>>> off threaded section in the head, rapped it a few times with a hammer, 
>>> proceeded to unscrew the broken-off lower portion of the spark plug and 
>>> brought the piece out, firmly set on the end of the screwdriver. The plug 
>>> has straight threads, of course, so was an "easy out". I had removed the 
>>> spark plug gasket as was/is proper for hemi's, but was not allowed to use 
>>> the boss' precision torque wrench. Live and learn. Whew. Getting the 
>>> spark plug gaskets off of the spark plugs is no easier now than it was then. 
>>> Wedge heads are advised here that the soft aluminum tube that surrounds the 
>>> plug and ignition wire in the hemi head curves around to fit closely to the 
>>> base of the spark plug and serves as the gasket. I still wonder how many 
>>> plug round trips that aluminum tube is good for. 
>>> 
>>> Recalling rich-est memories of Christmas' past at the station during the 
>>> winter. We were open, but closed early Christmas Eve and Christmas Day. 
>>> Some customers gave us Christmas tips and others brought fudge and cookies. 
>>> I loved working there in the '50's. We also closed early on New Year's eve, 
>>> mainly to avoid the drunks. The big Chryslers with 8.20X15 or 9.00X15 snow 
>>> tires never seemed to get stuck and had great heaters and defrosters. Those 
>>> parked outside often required a jump start, especially in sub-zero weather 
>>> that weakened batteries and thickened the motor oil. 
>>> 
>>> Best wishes to all for a Merry 300'ly Christmas and a Happy, Healthy and 
>>> Prosperous New Year. 
>>> 
>>> Rich Barber 
>>> 
>>> Brentwood, CA (27 last night-very cold for here) 
>>> 
>>> From: Chrysler300@xxxxxxxxxxxxxxx [mailto: Chrysler300@xxxxxxxxxxxxxxx ] On 
>>> Behalf Of Ronald Kurtz 
>>> Sent: Saturday, December 24, 2011 6:17 AM 
>>> To: chrysler300@xxxxxxxxxxxxxxx 
>>> Subject: [Chrysler300] Spark plugs 
>>> 
>>> Hello, everyone: 
>>> 
>>> During reassembly of engine, drive chain and other parts, I always chase all 
>>> 
>>> threads to help assure proper bolt and nut torque with appropriate taps and 
>>> dies. J10Y plugs are specified as 14mm, according to the shop manual. Can 
>>> anyone 
>>> recommend the correct thread pitch to clean out the threads for the spark 
>>> plugs 
>>> in the cylinder heads? 
>>> 
>>> Best, 
>>> Ron Kurtz 
>>> E #292 
>>> 
>>> [Non-text portions of this message have been removed] 
>>> 
>>> [Non-text portions of this message have been removed] 
>>> 
>>> 
>> 
>> 
>> 
>> [Non-text portions of this message have been removed] 
>> 
>> 
>> 
>> ------------------------------------ 
>> 
>> To send a message to this group, send an email to: 
>> Chrysler300@xxxxxxxxxxxxxxx 
>> 
>> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or 
>> go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button 
>> 
>> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
>> 
>> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo ! Groups Links 
>> 
>> 
>> 
> 




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.