[Chrysler300] 300D question

["jean-yves chouinard" <jymopar@xxxxxxxxxxxxxxx>]

Hi!

Some more questions for those in the know about 300D`s.

Is there supposed to be any thin rubber or plastic spacer in between the
body and the frame, at the attaching points?

Upon removing the body off the frame, we noted where all the cup shape
washers and all the shims were located and saw the remains of some kind of
plastic spacer, but only at the two rear attaching points. They were under
the cup shape washer, against the frame.

Any other places where there should be those plastic spacers??

Also the valve covers and air cleaners: I need to know what is the correct
finish for them. Glossy or semi gloss or flat??

Thank you!

Jean-Yves



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/