Hi Ron, I needed to replace my gas tank pad, so I used an old burlap bag that was in my garage. I cut the burlap bag and so far so good. Any material that will not retain water would probably work. Mark Lindahl '63 300 Conv. --- On Tue, 2/7/12, Ronald Kurtz <mark6268@xxxxxxxxxxxxx> wrote: From: Ronald Kurtz <mark6268@xxxxxxxxxxxxx> Subject: [Chrysler300] Gas Tank Pad for a '64 To: chrysler300@xxxxxxxxxxxxxxx Date: Tuesday, February 7, 2012, 3:44 PM Hello, everyone: I am looking for a suitable replacement pad that goes between the top of the gas tank and the trunk floor pan of a 1964 Chrysler. I have the original but it falling apart. Any suggestions would be appreciated. Best, Ron Kurtz E #292 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/