[Chrysler300] Sway Bar Link - 64 Chrysler

["charlies@xxxxxxxxxxxx" <charlies@xxxxxxxxxxxx>]

 Hi Group,
Uppon dissassembly of a sway bar from a 64 Chrysler, I noticed that the arms / rods on the sway bar links are slightly tilted from the casing that holds the bar bushing - i.e. - the rod is not 90 degrees to the casing. Both of the units are the same and the picture in the service manual seems to show this slight tilt (looks about 10 degrees). I thought that they might be bent out of position, but both are exactly the same so I'm not sure if this is the way it's supposed to be or not. Perhaps someone could crawl under their car and have a look. Thanks, Charlie in Ottawa


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/