Hello all: I am replacing the wheel studs on my "L" and most of the parts stores have different studs listed for different brake system manufacturers. I believe the differences are in the type & dimension of the "knurl" that actually anchors the stud into the drum. They list the identifier as drums that are "stamped", or not stamped - and/or by the manufacturer as being Budd, Kelsey-Hayes, or Motor Wheel (w/two different stampings). Also referred to is whether or not they are 2&3/4" or 3" front drums. My question is - looking at my drums (on the car) I see no stampings anywhere on the outside. Where is the manufacturer stamping, and (stupid question time) do I confirm brake width by measuring the friction surface? or is there a more foolproof way? or are all "L's" 3" front brakes? I can just go remove them and try to match w/ pictures but, I kinda wanted to buy them first, and then do the R&R all at one time. Any guidance would be greatly appreciated. Dan Richardson 300L Family Heirloom [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/