Re: [Chrysler300] 62 sport window gizmo

["Ron Waters" <ronbo97@xxxxxxxxxxx>]

Also, JB Weld may be a good choice if another piece wasn't available. Be 
sure to clean all parts thoroughly before using this 2-part epoxy. Also 
helps to rough up the surfaces a bit.

Ron


----- Original Message ----- 
From: "Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>
To: "Bill Leahy" <bleahy@xxxxxxxxxxx>
Cc: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, April 22, 2012 3:58 PM
Subject: Re: [Chrysler300] 62 sport window gizmo


Bill,

Finding the correct bracket is the best way to go, but I also found a 
'bandaid' approach.

Take some galvanized strap that has the holes punched in it.
Just run two straps from the top bolts on the bracket to the bottom of the 
motor.
It will hold the broken bracket together. I had this on my 300 for a couple 
years and it worked well until I found a replacement bracket.

**There are two types of brackets and this may only work on one type

Mark Lindahl
'63 300 conv.

--- On Sun, 4/22/12, Bill Leahy <bleahy@xxxxxxxxxxx> wrote:


From: Bill Leahy <bleahy@xxxxxxxxxxx>
Subject: Re: [Chrysler300] 62 sport window gizmo
To:
Cc: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx>
Date: Sunday, April 22, 2012, 1:19 PM







ok, so my passenger side power window goes ka-put.

i take off the door panel and the motor is laying at the bottom of the door. 
OMG

upon inspection i find that the mounting bracket is broken off at the bottom 
where it attaches to the motor.

kind of a pot metal type mount gizmo.

can one weld this material?

so, does anyone have any of these mounts laying in there stash?

billlllllll in sunny kennewick, washington

PS, getting pretty hot here and it would have been nice if it had broke with 
the window in the down position : )








[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups 
Links





------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/