Doug, FelPro shows RDS 6583 round, 8-11/16" inside and 10-19/32" outside and 10 holes. Through Summit Racing, RayTech makes what should be a better gasket than is available from FelPro for the axle for $12. Permatex item 29208 Right Stuff will replace the cover gasket. Sealing surfaces should be clean and dry. May not want Right Stuff on a RayTech gasket but a light, even coat on a FelPro would be advised. Right Stuff is hard to get off human skin so Nitrile gloves would be advised. Rear axle pieces for a lot of applications can be sourced from Randy's Ring and Pinion, Everette, WA. Warren Anderson Sedona,AZ Good Evening, Anybody know sources and availability of Chrysler part # 1673367--the carrier gasket for an 83/4 rear end? Did not find it on the NAPA list; saw what CarQuest thought would work, but it was square. Need if for an L. Thanks. Doug Doug Mayer Northport, Maine sent from my older iMac [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/