Re: [Chrysler300] Ignition Cables/Sure Grip or not?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Ignition Cables/Sure Grip or not?



I run my Pertronic equipped C with NO ballast resister... Starts and runs fine.

George


On Feb 3, 2013, at 6:58 PM, "Rich Barber" <c300@xxxxxxx> wrote:

> I'm also curious as to whether the Petronix system starts on 12 V and runs
> on lower voltage fed through the ignition resistor-or just a full 12 V at
> all times?
> 
> Second question: How does one check for a Sure-Grip differential in a
> non-op car? With one rear wheel jacked up and the tranny in neutral should
> the jacked-up wheel turn freely or lock up? With both rear wheels jacked
> up, does turning one wheel cause the other to rotate in the same or reverse
> direction?
> 
> Rich Barber
> 
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
> Behalf Of Ronald Kurtz
> Sent: Sunday, February 03, 2013 1:31 PM
> To: chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] Ignition Cables
> 
> Hello, everyone:
> 
> What is the best ignition cable and coil to use with a Petronix Flamethrower
> 
> distributor? I am thinking about upgrading my ignition system.
> 
> Best,
> Ron Kurtz
> E #292
> 
> [Non-text portions of this message have been removed]
> 
> 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.