Re: [Chrysler300] '65 L front brake width

[therichardsonfamily@xxxxxxxxxxx]

Thanks Fern, and Rich, and Don, and everyone else for the advice - it's great to be able to be confident in the information - rather than only having the retailers and parts books to rely on. 

I'm putting new drums on the front, are they pressed onto the hub when assembled? or is it just 48+ years of rust, etc. that has held them on so stubbornly? I want to be sure I put everything back together properly . 

Any other sage advice for me? Arc the new shoes to the new drums, all new hardware, brake lines, etc., repacked bearings. 

Time to get 'ol Letter L out there to enjoy. Thanks again. 

Dan Richardson 
300L Family Heirloom 


----- Original Message -----
From: "Don Warnaar" <300country@xxxxxxx> 
To: "300 Club" <chrysler300@xxxxxxxxxxxxxxx>, therichardsonfamily@xxxxxxxxxxx 
Sent: Monday, March 4, 2013 6:31:14 AM 
Subject: Re: [Chrysler300] '65 L front brake width 

 

Dan, 

The information in the sources I have (including the AMA spec sheets) are somewhat difficult to get an accurate picture. The 1965 Mopar Parts Book also adds some confusion. 

I ordered my 300L new and one of the options was HD suspension and brakes. That, by the way, was the bargain of the century - $35. There was no disc brake option. 

That being said, the Parts Book shows a disc brake option for C Body Mopars n 1965, but indicates that it was a police car option. That probably was more apt to be available on the Plymouth or Dodge. 

The lining was 11 x 3 for the HD brakes. Not sure of the standard, but suspect it might have been 11 x 2 3/4. 

Measuring the inside diameter and the depth of the drums should give you the information you need. Also, just measure the width of the shoes, assuming they are original to the car. 

Don't be concerned about asking a dumb question. It's the dumb answers (like mine?) that might be a problem. Seriously, that's what we do on the Listserver - try to help our fellow 300 Nuts. 

Don Warnaar 
300L Consultant 




----- Original Message ----- 
From: therichardsonfamily@xxxxxxxxxxx 
To: 300 Club 
Sent: Sunday, March 03, 2013 7:49 PM 
Subject: [Chrysler300] '65 L front brake width 

I hate to ask a dumb question but, I will....... 

1965 300L - do I have 11" x 3" front brakes, or 11" x 2&3/4"? 

Or is there more I need to research to determine the answer? If so, is it so simple that all I need to do is measure the shiny part on the inside of the current drums? 

Thanks in advance, 

Dan Richardson 

300L Family Heirloom 

this group, send an email to bob@xxxxxxxxxxxxx or 
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button 

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang 


Yahoo! Groups
Switch to: Text-Only , Daily Digest • Unsubscribe • Terms of Use • Send us Feedback 


. 

 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/