Re: [Chrysler300] Painting Ram Manifolds

[Richard Osborne <reomotorsports1@xxxxxx>]

Mark,

When I did the rams on the G, I had them bead blasted as you did, then wiped clean, and primed with high temp primer from spray can, then used a spray can to put color on them. I feel they turned out great and have held up very well. Like many things, success lies in the prep work.

Best regards,

Richard

On Aug 7, 2013, at 10:06 PM, Mark Schueller <f41324@xxxxxxxxxxxxx> wrote:

> 
> Hi Guys:
> 
> I'm looking for paint prep recommendations for 300F long ram manifolds. The rams have been media blasted to bare aluminum. I have 500 degree grey engine primer and the correct red Cummins paint. I'm not sure how to prep the aluminum for good adhesion. I checked the our web site for technical assistance and didn't find any. Your suggestions are appreciated. Thank you!
> 
> Mark Schueller
> 300C,F 
> 
> [Non-text portions of this message have been removed]
> 
> 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/