Re: [Chrysler300] wheel sizes for Chrysler cars

[Anna F Noia <sa-noia@xxxxxxxxxxx>]

John

I did the same thing, sort of. I used the 17" 2004 Chrysler 300 alloy #2243 and they worked. The Intrepide steel wheels are possibly also 17" but maybe 16". If you're changing for size, go to the 17", get the look. If it's not the stock wheel, then go all the way wrong. By the way my car has 1974 Chrysler front Disc's and 74 Imperial rear disc's. Good Luck.

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

From: John Nowosacki <jsnowosacki@xxxxxxxxx>
To: list server <chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, November 8, 2013 10:13 AM
Subject: [Chrysler300] wheel sizes for Chrysler cars

 

I was thinking of trying to locate some larger than 14" rims for my 57 as I think the wheel wells need to be better filled.

I have come across a set of very inexpensive steel wheels from a Dodge Intrepid.  They are supposedly 5 x 4.5 bolt circle, but I'm not sure about hub center bore or wheel depth as far as them being able to go over my rear drums or my front disc brakes.

Any ideas?

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___