RE: [Chrysler300] Manifolds and carbs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Manifolds and carbs





I believe that at least the problem was fitting the power brake booster onto the firewall of a chassis that had been shortened 4”—mainly in the area in front of the cowl.  In 1963 & 1964, the ram-engined cars had a small unboosted master cylinder on the firewall connected to a vacuum-boosted master cylinder suspended in the LF fenderwell. 

 

I did see and photograph a 300K that had been converted from the normal power brake booster and a single four-barrel engine to a full ram intake manifold and dual carbs—with the standard booster.  The steel tubing outlet from the standard MC was connected to the downward-facing outlet and the horizontal opening was plugged.  That left about ¼” between the LH carb and the plug in the end of the MC.  I don’t recall where the stoplight switch was located.  Apparently too close for comfort for Chrysler.

 

C300K’ly,

Rich Barber

Brentwood, CA

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Ronald Kurtz
Sent: Tuesday, January 28, 2014 4:42 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Manifolds and carbs

 

 

Hello, everyone:

 

I've been following the thread on the '62 Chrysler 300 (H?) and now wonder why C300, B, C, D and E had a 2x4 bbl. intake manifold and the F, G, J and K (option) had ram induction. What was Chrysler's logic for this on-again and off-again aspiration? Just curious.

 

By the way, I will have a '64 K 360 HP engine in running condition complete with correct carb and air cleaner up for sale this Spring. Asking $500. Buyer picks up. Please advise if interested.

  

Best,

Ron Kurtz

E #292 



__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.