RE: [Chrysler300] 1962 Chrysler sill molding

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

I’m in your corner Mark.  Before you wrote I thought I was going nuts.

Carlton

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Mark Souders
Sent: Monday, March 24, 2014 8:37 PM
To: mmoore8425@xxxxxxx; c300@xxxxxxx
Cc: 2HsandaHeritage@xxxxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 1962 Chrysler sill molding

 

Maybe it's just my computer, but the picture I got looks exactly like a white 300H to me.

 

Mark

 

-----Original Message-----
From: Michael Moore <mmoore8425@xxxxxxx>
To: Rich Barber <c300@xxxxxxx>
Cc: 2HsandaHeritage <2HsandaHeritage@xxxxxxxxxxx>; chrysler300@xxxxxxxxxxxxxxx Club <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Mon, Mar 24, 2014 8:49 pm
Subject: Re: [Chrysler300] 1962 Chrysler sill molding

Yes! Gorgeous 300K! 

 

 



On Mar 24, 2014, at 5:40 PM, Rich Barber <c300@xxxxxxx> wrote:

 

I believe you can send pictures to an individual, just not to the server.  If you attach pictures and send to both, the individual and the club server, the pictures will go through to the individual but not to the server.  To test this, I’m attaching a picture of our ’64 300K convertible.   Mike & Doug:  please confirm this theory by letting me know whether or not you receive the picture.

 

C300K’ly,

Rich Barber 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 2HsandaHeritage@xxxxxxxxxxx
Sent: Monday, March 24, 2014 3:00 PM
To: Michael Moore
Cc: chrysler300@xxxxxxxxxxxxxxx Club
Subject: Re: [Chrysler300] 1962 Chrysler sill molding

 

  

Hi Mike, 

I believe that I have some H restoration pictures that show the clip locations.

Oh - I forgot, I can't attach pictures.

Will send you a separate e-mail.

Doug Warrener

 

  _____  

From: "Michael Moore" <mmoore8425@xxxxxxx>
To: "chrysler300@xxxxxxxxxxxxxxx Club <mailto:chrysler300@xxxxxxxxxxxxxxx%20Club> " <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 24, 2014 10:07:18 AM
Subject: [Chrysler300] 1962 Chrysler sill molding

 

  

 

This morning I removed the "rattly" and loose sill molding from the drivers side of my 300H..

 

I had previously purchase a set of 10  clips for both sides.

On my loose drivers side, there are only 4 molding clips installed. It looks like the missing one is up front very close to the front screw. 

 

 

(1.) Does a clip go that close? There are no holes there as that area had extensive rust repair many years ago and it wasn't drilled I guess.

 

 

(2.) What is the proper way to install the stainless molding once the clips are in place?  

(a.) Slide the molding in front the front and risk paint damage

 (b.) Somehow lift up and snap in?

 

Thanks, Mike Moore

300H

 

<2013-11-03 14.37.48.jpg>

 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/