|
Hi All
I finally got to my shop to fill several orders. It will
be nice when my 16' high x 40' x 75' building is completed on my property at
home. When I return home the plans and engineering will be ready to submit to
the San Diego Building Dept. I am tired of driving 500 mi. to Carson
City.
Now about the trans. A few years ago I rebuilt a late
Torqueflite for a 60 300 owner. He called me and said something was wrong
with trans. I guarantee my work and told he to return for full refund.
Later he called me back to tell it was his torque convertor that was the problem
and not the transmission I rebuilt.
I do not rebuild trans any longer. When I did, I only
did high quality rebuilds that take 40 hours or more. I start by hot
pressure washing, then media blasting the exterior prior to opening up. Then
every part is scrubbed clean. The old saying, you could eat off it. It was
rebuilt to 300 HD specs. I use a master rebuild kit
that includes new clutch discs and plates, new steel and rubber seal rings, and
premium composition pan gasket and NOS pump drive sleeve. I started with a low
mileage core. The internal parts where in excellent condition.
I charged him $1200 exchange for his core. I will sell
for $800 NO core exchange. You get a $325 master kit, $55 NOS pump drive
sleeve, $13 premium pan gasket + other misc. thrust washers + a $300 core.
You are getting my labor for less than $100. I guarantee it or return for full
refund. You only risk ship cost.
This offer is only good for the next couple of days. I
can secure it to a pallet and ship by truck lines that I get discounts. They
only drop at a business or terminal.
If you are interested give me your ship to location. I
will get freight rate to you. Need to use PayPal for this
transaction or over night bank check.
Thanks,
Gary, The Parts Doc
I am on my cell 775.750.5588 around 6pm Pacific is best
to call.
__._,_.___ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap