[Chrysler300] temperature gauge actual temperatures

["Tony Bevacqua" <tonysru2@xxxxxxxxxxx>]

FYI, I found my G having a VERY high read with no boiling nor overflow, etc., so Jeff Carter suggested that he send me a recently calibrated one to put in, which I did.  I sent him mine and kept his because it brought the temps down to normal readings.  You might consider this way, especially if you want the correct gauge for your year.

Tony

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Charlie V
Sent: Monday, May 05, 2014 2:53 AM
To: rinandal; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] temperature gauge actual temperatures

 

 

Hi Van,

I would say that in the middle is just right and over there on the side of " H " is too HOT.

 

But not necessarily so. On my 62 300 Sport Convertible the gauge is always on the " H " side. I installed another temp gauge and that show the engine running around 185 degrees.

 

Charlie Valentine

 

From: rinandal <rinandvan@xxxxxxx>
To: chrysler300@xxxxxxxxxxxxxxx
Sent: Friday, May 2, 2014 6:03 PM
Subject: [Chrysler300] temperature gauge actual temperatures

 

 

Hi all,
Heat just came on in southern CA. Which brings me to my question . On my 1964 K there are no numbers on the temperature gauge. So if all is stock and in good working order for the sake of this question: What temperature does the little "overheat" section on the right hand(hot) side of the gauge represent?

Thanks,
Van

 

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___