[Chrysler300] 300G electrical problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 300G electrical problem





Started car a couple of days ago, ran until warm and turned key off.  Engine continued running with key in any position - on, off, accessory.  Not simple dieseling or run-on.  Only way to stop is by turning key to off, holding brake and putting in drive or getting out and pulling coil wire off.  Replaced ignition switch to no avail.  Any group thoughts as to problem and cure  ??  Any help will be greatly appreciated.  I'm no expert with auto electrical.

Side note:  NAPA was closed so I bought the ignition switch @ Advantage Auto for $4 less and swapped out the tumbler.

Del Kerney


__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.