Re: [Chrysler300] 300H Plug Wire Supports

["2HsandaHeritage@xxxxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>]

Mike,

They all slant away from the valve covers and are angeled toward the front of the car.

If you need to re-apply the rubberized coatings, I know how.

Doug Warrener

---

From: "Chrysler 300 Club International" <Chrysler300@xxxxxxxxxxxxxxx>
Cc: "Chrysler 300 Club International" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, May 26, 2014 7:06:57 PM
Subject: [Chrysler300] 300H Plug Wire Supports

 

Can someone please tell me how the metal wire separators which are held on with valve cover screws are correctly arranged?   Do they all point outward, all point inwards?

There are small rubber washers provided with some gasket kits. Where do they go?

Thanks, Mike Moore

300H

__._,_.___

---

Posted by: 2HsandaHeritage@xxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___