Re: [Junk released by Allow List] Re: [Chrysler300] 1970 300 treat tonneau clips

["John Holst jholst@xxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>]

All, the clip for the boot cover, part no. 2878583, was
dropped from the parts book in 1991. A check with my local dealer showed
that there was no known leftover stock at any dealer in the U.S. Sorry
that you would have to dig up something else from an older archive of
parts or rebuild them from scratch. Would have been good for my 1990
LeBaron CV at the time...

John Holst...

At 08:03 PM 5/29/2014, you wrote:
>   
>
> George:
>  
> I know exactly what you are talking about.
>  
> First, a little personal reflection...
>  
> In the summer of 1986, on a trip to Michigan to visit family, I came
> across a 1969 300 convertible in a wrecking yard near Grand Rapids. 
> It had been there several years and was a bit waterlogged from sitting
> out in the Michigan environment.  I did manage to save the moldly
> remnents of the original convertible top boot, which contained many of
> the plastic clips you mentioned.
>  
> Curious about their origin, I carefully removed one from the old
> boot.  What I discovered molded into the plastic clip face, was a
> Chrysler part number, 2878583.  In the fall of 1986, I went to the
> local Chrysler dealer parts department and asked them to run the part
> number.  At that time, the part number was good, with stock
> indicated.  I could have ordered as many as I wanted for 56 cents a
> piece.  In a trip to the showroom, I soon discovered that four of
> these clips were used in each of the boot covers of the then, brand new,
> 1987 Chrysler LeBaron convertible.
>  
> What has truly amazed me is that I have never heard of anyone else
> discovering the part number of these little clips as I did, either before
> or after I did.  I guess this have been my little secret for the
> last 28 years.
>  
> So, the best sourse I can give you is Chrysler.  You may want to see
> if they are still available today.  I still have that old boot, and
> I still have 15 used clips available.
>  
> Chris the K MANIAC
>  
>  
> -----Original Message-----
> From: George McKovich george@xxxxxxxxxxxx [Chrysler300]
> <Chrysler300@xxxxxxxxxxxxxxx>
> To: Intl 300 <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Thu, May 29, 2014 4:54 pm
> Subject: [Chrysler300] 1970 300 treat tonneau clips
>
>   
> Does anyone know if a source for these 1970 chrysler 300 convert rear
> tonneau cover clips?? Anyone have any extras? I can send pics if
> needed.
>
> Please respond off list to me at: 
>
> george@xxxxxxxxxxxx 
>
> Thanks
> George

__._,_.___

---

Posted by: John Holst <jholst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___