|
Hi Terry,
Wrong master cylinder. Sounds like one for a manual brake car. You can only
get them out with the unit in a vise.
Don Sent: Thursday, July 31, 2014 8:23 PM
Subject: [Chrysler300] 300F Brakes Again!
Terry McTaggart here in Dayton OH. New wheel cylinders, new master
cylinder, new fluid, linings are great, all done by my local shop. And I
myself jacked the car up and adjusted all the brakes. Car stops fine, but
the pedal is low. Shop manual says the adjustment for this is the pushrod
from the brake assembly thru the firewall into the master cylinder. But my
car has a one-piece push rod, so there is no adjustment. So Murray Park
sent me the correct two-piece pushrod. Inside the car, I disconnected the
current pushrod from the brake pedal, but when I attempted to slide the
pushrod out, it would not come out, even when I used considerable force.
Looking at the manual, it should just slide out. Anybody got any ideas as
to why it won't come out? __._,_.___ Posted by: "Don Verity" <d.verity@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap