Re: [Chrysler300] Ram installation on an F

["'Don Verity' d.verity@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Dave,

Some would be the same, but you have A/C and will have a few bolts that are longer. All the intake bolts are also grade 8. That is why the 50 lb. torque spec. as opposed to the same size bolt in the water pump being 30. Lock washers with no flats would be correct.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Wednesday, August 06, 2014 11:51 AM

To: mailto:Chrysler300@xxxxxxxxxxxxxxx

Subject: [Chrysler300] Ram installation on an F

 

 

Putting the F back In service soon and wondering if intake manifold bolts

From a donor 383 (1960) would be the same and correct for the F.

Had used generic hdw store bolts in the past w/flats and locks but they just don’t look right.

What kind of flats and locks, if any, would be close to correct for this app??

Thanks Guys!

Dave Schwandt

__._,_.___

---

Posted by: "Don Verity" <d.verity@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___