Re: [Chrysler300] Power Window Gearbox Failure

Hi Terry , I have made a few prototypes and then about 25 all metal gears of aluminum bronze . Had to cnc whole gear works very well . All the F style nylon gears will fail .. They get hard in oil and split around the rim . J-y up in Canada is running with this , as we had to make some simple tools to press gear off etc . So he can fix F box . May work for other years . This is the most commin box we think . We will also sell loose gears for those who can do it . We have the cnc program for a matsura cnc mill

For once , good news !.

On Sep 3, 2014, at 8:37 PM, "Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300]"<Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Terry McTaggart here. Over the last few years, I have experianced two failures in the power window gearboxes in my 300F. Both failures were identical, in that the plastic gear teeth surrounding the metal disk inside the gearbox broke, rendering the gearbox useless. Fortunately I had two spares in the attic and was able to replace the offending part. Now, however, I have no more spares and the next failure (if there is one) will be a major problem. Has anyone else experienced this failure, and if so, might this be a good project for the repro committee?

__._,_.___

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 4

• Privacy • Unsubscribe • Terms of Use

__,_._,___