Re: [Chrysler300] Dropping the oil pan.

["'Don Verity' d.verity@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Rick,

You will have to jack it up a little. I would unbolt the mounts from the frame and jack it up enough to slip some  2 X 4 blocks under the mount. That should give you enough clearance. Watch the clearance between the fan and shroud, and the rams and the heater box.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Tuesday, January 27, 2015 4:54 PM

To: 'Chrysler300'

Subject: [Chrysler300] Dropping the oil pan.

 

 

Does anyone know about dropping the oil pan on the 413’s? This would be on my G. I know I’ll have to remove the center link and exhaust crossover.  Will I have to jack up the engine to gain more clearance at the K member? Thanks.

__._,_.___

---

Posted by: "Don Verity" <d.verity@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___