Re: [Chrysler300] Straight and on centerline?

["'mgoodknight@xxxxxxxx' mgoodknight@xxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

The engine is not centered!

          ----- Marshall

---------- Original Message ----------
From: "Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300Club Intl." <chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] Straight and on centerline?
Date: Thu, 29 Jan 2015 00:17:46 +0000 (UTC)

 

My engine and 4 spd are now installed.  Good mounts lined up on the frame studs, and trans tailshaft was tweaked into place to line up mount with bolt and washer.

 

Looking into the engine comp't with hood not installed, the rear of the engine seems to be twisted a bit towards the pass side.

 

Should the center of water pump line up with center of radiator grill?  (radiator is not installed)

I am thinking of installing radiator and then 4 blade fan, and check clearance between fan tips and radiator.

 

If the spacing is even,then there should be no concerns>

 

Thanks,

Dave

 

 

 

__._,_.___

---

Posted by: "mgoodknight@xxxxxxxx" <mgoodknight@xxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

____________________________________________________________
The #1 Worst Carb Ever?
Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
FixYourBloodSugar.com