Re: [Chrysler300] Update - Spark & Fuel - No Start

["Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

No need to let the oil sit, pump in a liberal amount with a syringe, pump style oil can etc. Then, with the plugs all still out, turn it over a few times. You should immediately see compression return. Install plugs, prime carb bowls, (no more starter fluid) , then start the engine.

Sent from my iPhone

On Feb 7, 2015, at 1:04 PM, "Mwl1967 mwl1967@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Thanks for all who had suggestions. Reconfirmed all the ignition and fuel is ok. Started pulling plugs and was only able to get my compression tester into 4 of the eight holes; two on each head. I've only got between 30-50 psi. I guess it's good news that I didn't find any zero readings.  Gonna run some marvel mystery oil in there, cycle it over the next couple nights then re test compression.

 

Any other thoughts?

 

Thanks,

Mike

 

 

__._,_.___

---

Posted by: Ryan Hill <ryan_hillc300@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___