Re: [Chrysler300] Bleeding brakes on the 59 300E ..................................

["2HsandaHeritage@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Tom,

Try hitting the break petal hard and note what happens.

If you initially get results and then the petal goes to the floor, your new master cylinder may be the problem - brake fluid bypassing the piston.

Same thing could be happening in the wheel cylinders.

Doug Warrener 

---

From: "Chrysler300E@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, March 1, 2015 8:01:20 AM
Subject: [Chrysler300] Bleeding brakes on the 59 300E ..................................

 

Good Afternoon to Everyone out there in 300 Land!

 

Subject:  Bleeding brakes

 

My rear brakes were starting to lock up when I applied the brakes while coming to a stop.  I replaced the master cylinder and rebuild the rear brake cylinders.  Now that I've bled the brakes, or at least I thought, the brake pedal is going all the way to the floor.  Any suggestions?

 

Thanks to any and all responses in advance!

 

Tom

South Miami, Florida

__._,_.___

---

Posted by: 2HsandaHeritage@xxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___