RE: [Chrysler300] Dash pads

Well shoot. I meant far right hand side/end—the passenger’s side, STARBOARD, DOGGONEIT!

Rich

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Rich Barber' c300@xxxxxxx [Chrysler300]
Sent: Sunday, March 22, 2015 2:31 PM
To: pffkllc@xxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] Dash pads

Pete:

I was fortunate to find a good used blue one on e-Bay for our RR Konv. Black
vinyl dye made it look just fine. If you do find one, remember to handle it
carefully. The steel reinforcement does not go clear across the pad and the
foam underlayment can be brittle and broken-especially at the end of the
reinforcement plate-as did my deteriorated old one. These dash pads tend to
deteriorate rapidly at the far left corner/end where the foam is thinner and
the sun damage the most pronounced.

300K'ly

Rich Barber

Brentwood, CA

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of pffkllc@xxxxxxx [Chrysler300]
Sent: Sunday, March 22, 2015 9:46 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Dash pads

Hi Group:

Is anyone doing dash pads other than Just Dashes? I need a pad for
Anne's K convert. Any information will be appreciated.

Thanks,

Pete Fitch

[Non-text portions of this message have been removed]

__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___