|
I doubt 90 degrees is tie rod..but anything is possible..that is a lot off. sounds like some part of column or attachment of pitman arm was assembled incorrectly? What was done, and why? From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300] My recollection is that the wheel, steering box, shaft and idler are all indexed. I assume it was centered prior to disassembly and new parts installed? The only adjustment should be at the tie rods. Are they evenly adjusted? My suspicion is they aren't…. What to tell the dealer? If it is the tie rod adjusters that aren't centred, I would ask for my money back and head to someone who understands basics mechanics. To: chrysler300@xxxxxxxxxxxxxxx Had new parts installed on 1966 300 and dealer can not center steering wheel. It is off 90 degrees!!! Isn't this a simple fix? You can not just recenter the wheel as it is indexed. What do I tell the dealer? Larry W Jett __._,_.___ Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap