Re: [Chrysler300] 300F decklid wheel cover

["GARY RUNKEL moparfan@xxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Deck lid wheel cover has no hole for the tire valve stem.

---

From: "Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>
Cc: "<chrysler300@xxxxxxxxxxxxxxx>" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, May 18, 2015 11:26:22 PM
Subject: Re: [Chrysler300] 300F decklid wheel cover

 

Bob,

Yes the hubcap itself is identical, but has 4 attached brackets with short integrated bolts that fit through the holes in the decklid, fastened by nuts from the underside of the decklid. It's been about 3 years since I removed mine to freshen it up with a new 300 center, and paint. I recall that these small brackets were welded or braised onto the hubcap.

Noel Hastalis

Burr Ridge,IL

F Coupe 

Sent from my iPhone

On May 18, 2015, at 10:12 PM, "'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

 

For you F experts out there, is the wheel cover on the F decklid the same as the wheelcover on the wheel?  A friend of mine sold a 300F that shipped to Switzerland and someone stole the cap in transit.  Trying to help him replace it.

 

Bob J

__._,_.___

---

Posted by: GARY RUNKEL <moparfan@xxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___